- Posts: 68
- Thank you received: 2
- Points: 18000.00
- Home
- TM3D Forum
- The Movies
- Mod Showcase
- trouble with export mesh
trouble with export mesh
- MikroMX563
- Offline
- Senior Boarder
Less
More
10 years 11 months ago #1484
by MikroMX563
MikroMX563 replied the topic: Re: trouble with export mesh
I´ve seen that you tried to export your model with the Blender plug-in "The Movies (.msh) 2009" and i can say that this plug-in did´nt work right. Try to export your model with the other plug-in called "The Movies (.msh)". This plug-in worked fine. Try that, and you will see that you have no problems.
WfG,
MikroMX563
WfG,
MikroMX563
Please Log in or Create an account to join the conversation.
- boothoort
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 10
- Thank you received: 0
- Points: 250.00
10 years 11 months ago #1485
by boothoort
Please Log in or Create an account to join the conversation.
- MikroMX563
- Offline
- Senior Boarder
Less
More
- Posts: 68
- Thank you received: 2
- Points: 18000.00
10 years 11 months ago - 10 years 11 months ago #1486
by MikroMX563
MikroMX563 replied the topic: Re: trouble with export mesh
Hmm, this seems to be a bigger problem. Unfortunately, I can't do anything with the contents of the console. However, I may have a solution proposal.
You need the Blender version 2.43. In addition to my knowledge must be installed Python in version 2.4. Have you these two programs installed in these versions? If not then please do it. Is Python installed in a higer version, then deinstall this version. Hope that helps. If not write back and pls post next time the complete contents from the console and tell me which versions of the programs are installed.
WfG,
MikroMX563
You need the Blender version 2.43. In addition to my knowledge must be installed Python in version 2.4. Have you these two programs installed in these versions? If not then please do it. Is Python installed in a higer version, then deinstall this version. Hope that helps. If not write back and pls post next time the complete contents from the console and tell me which versions of the programs are installed.
WfG,
MikroMX563
Last edit: 10 years 11 months ago by MikroMX563.
Please Log in or Create an account to join the conversation.
- boothoort
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 10
- Thank you received: 0
- Points: 250.00
10 years 11 months ago #1487
by boothoort
boothoort replied the topic: Re: trouble with export mesh
blender 2.43 w/ python. any time in console send different errors.
Compiled with Python version 2.4.
'import site' failed; use -v for traceback
Checking for installed Python... No installed Python found.
Only built-in modules are available. Some scripts may not run.
Continuing happily.
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
--- Object.001
Traceback (most recent call last):
File "<string>", line 746, in my_callback
File "<string>", line 698, in save_msh
File "<string>", line 247, in write_group
File "<string>", line 380, in write_mesh
ValueError: Armature "Bones" not found
Compiled with Python version 2.4.
'import site' failed; use -v for traceback
Checking for installed Python... No installed Python found.
Only built-in modules are available. Some scripts may not run.
Continuing happily.
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
iconv Error
--- Object.001
Traceback (most recent call last):
File "<string>", line 746, in my_callback
File "<string>", line 698, in save_msh
File "<string>", line 247, in write_group
File "<string>", line 380, in write_mesh
ValueError: Armature "Bones" not found
Please Log in or Create an account to join the conversation.
- MikroMX563
- Offline
- Senior Boarder
Less
More
- Posts: 68
- Thank you received: 2
- Points: 18000.00
10 years 11 months ago - 10 years 11 months ago #1488
by MikroMX563
This is weird. Python must be installed on each case. As I said, you need the version 2.4, all other versions will not work.
There must be no older version available. Otherwise, something seems to be wrong with the plug-ins.
Downloadlink for Python 2.4:
http://www.themovies3d.com/en/downloads/viewdownload/36-tools-a-utilities/938-python.html
The "iconv Error" is weird to. Don´t heard anything about that before. If this donk work too, i´m not sure that i can help you.
WfG,
MikroMX563
Edit: Before I forget. You could possibly also upload the model so I could see if it's not the model itself.
MikroMX563 replied the topic: Re: trouble with export mesh
boothoort wrote: Checking for installed Python... No installed Python found.
This is weird. Python must be installed on each case. As I said, you need the version 2.4, all other versions will not work.
There must be no older version available. Otherwise, something seems to be wrong with the plug-ins.
Downloadlink for Python 2.4:
http://www.themovies3d.com/en/downloads/viewdownload/36-tools-a-utilities/938-python.html
The "iconv Error" is weird to. Don´t heard anything about that before. If this donk work too, i´m not sure that i can help you.
WfG,
MikroMX563
Edit: Before I forget. You could possibly also upload the model so I could see if it's not the model itself.
Last edit: 10 years 11 months ago by MikroMX563.
Please Log in or Create an account to join the conversation.
- boothoort
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 10
- Thank you received: 0
- Points: 250.00
10 years 11 months ago - 10 years 11 months ago #1489
by boothoort
boothoort replied the topic: Re: trouble with export mesh
>Checking for installed Python... No installed Python found.
this message appear after i install python from this site
>You could possibly also upload the model so I could see if it's not the model itself.
www.filedropper.com/2blendblend2
this message appear after i install python from this site
>You could possibly also upload the model so I could see if it's not the model itself.
www.filedropper.com/2blendblend2
Last edit: 10 years 11 months ago by boothoort.
Please Log in or Create an account to join the conversation.
- MikroMX563
- Offline
- Senior Boarder
Less
More
- Posts: 68
- Thank you received: 2
- Points: 18000.00
10 years 11 months ago - 10 years 11 months ago #1490
by MikroMX563
MikroMX563 replied the topic: Re: trouble with export mesh
Okay, now i have the answer!
Think this model contains stuff which is makes the problem. I tried to do some things, and now it worked fine. Do the same like i´ve done:
1. Open the model in Blender
2. Export the model as a "Wavefront (.obj)"
3. Now import the model as a "Wavefront (.obj)"
4. Export your model then with "The Movies (.msh)" not "The Movies 2009(.msh)"
This way should solve the problem. Hope this helps finally.
WfG,
MikorMX563
Think this model contains stuff which is makes the problem. I tried to do some things, and now it worked fine. Do the same like i´ve done:
1. Open the model in Blender
2. Export the model as a "Wavefront (.obj)"
3. Now import the model as a "Wavefront (.obj)"
4. Export your model then with "The Movies (.msh)" not "The Movies 2009(.msh)"
This way should solve the problem. Hope this helps finally.
WfG,
MikorMX563
Last edit: 10 years 11 months ago by MikroMX563.
Please Log in or Create an account to join the conversation.
- boothoort
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 10
- Thank you received: 0
- Points: 250.00
10 years 11 months ago #1491
by boothoort
boothoort replied the topic: Re: trouble with export mesh
but now mesh lost his bones i dont know how to fix it
Please Log in or Create an account to join the conversation.
- MikroMX563
- Offline
- Senior Boarder
Less
More
- Posts: 68
- Thank you received: 2
- Points: 18000.00
10 years 11 months ago - 10 years 11 months ago #1492
by MikroMX563
MikroMX563 replied the topic: Aw: trouble with export mesh
You can add the bones with the tool "MeshManip 2009".
DL: http://themovies3d.com/de/downloads/viewdownload/36-tools-a-utilities/859-meshmanip-2009-v3.html
First you have to load your exported .msh-file in it, then click on the "Edit" and "Modify". You get a list now. Check followed options: has bones, has rooms, has tranform, has submesh and has names2. Click then update. You will get a error, but you can click on next. Save the file and reload it. You will see that in the left window adds "Bones(0)". Load a original costume from TM and click on the bones from it. It must have "Bones(30)". Copy that and paste it on your model. Next step is to conect the bones with the vertices from the model. Open the tree "Groups(1)" until the last entry. Now modify "Mesh 0" and check "has weights", choose "Match Weight to closest...." and type in the field "max distance to match" 1.0. Now update again, save your file and you will see, it works.
I´ve made for some years a tutorial, but it is in german. I think it should help regardless.
http://www.youtube.com/watch?v=73Kf5pxqj9c&feature=player_embedded
Ohh, an additon to the video: DONT ADD "Limit Vertex Assignment....", or it will not work.
Good luck^^
WfG,
MirkoMX563
DL: http://themovies3d.com/de/downloads/viewdownload/36-tools-a-utilities/859-meshmanip-2009-v3.html
First you have to load your exported .msh-file in it, then click on the "Edit" and "Modify". You get a list now. Check followed options: has bones, has rooms, has tranform, has submesh and has names2. Click then update. You will get a error, but you can click on next. Save the file and reload it. You will see that in the left window adds "Bones(0)". Load a original costume from TM and click on the bones from it. It must have "Bones(30)". Copy that and paste it on your model. Next step is to conect the bones with the vertices from the model. Open the tree "Groups(1)" until the last entry. Now modify "Mesh 0" and check "has weights", choose "Match Weight to closest...." and type in the field "max distance to match" 1.0. Now update again, save your file and you will see, it works.
I´ve made for some years a tutorial, but it is in german. I think it should help regardless.
http://www.youtube.com/watch?v=73Kf5pxqj9c&feature=player_embedded
Ohh, an additon to the video: DONT ADD "Limit Vertex Assignment....", or it will not work.
Good luck^^
WfG,
MirkoMX563
Last edit: 10 years 11 months ago by MikroMX563.
Please Log in or Create an account to join the conversation.
- boothoort
- Topic Author
- Offline
- Fresh Boarder
Less
More
- Posts: 10
- Thank you received: 0
- Points: 250.00
10 years 11 months ago - 10 years 11 months ago #1493
by boothoort
boothoort replied the topic: Re: trouble with export mesh
thanks, you help me, it was very difficult.
Last edit: 10 years 11 months ago by boothoort.
Please Log in or Create an account to join the conversation.
Moderators: Tonda